MannTek DDC 2 in Hose Unit Design 2.0 Service Manual
Product Information
CA | en
Search
Temperature De-rating Chart
Size
Fitting
Clamp
Temperature
Working Pressure
1
STC10CS
Sleeve
70°F (21°C)
400 PSIG (2758 KPA)
STC10CS
Sleeve
160°F (71°C)
270 PSIG (1862 KPA)
STC10CS
Sleeve
180°F (82°C)
250 PSIG (...
3-A Certifications
3-A Sanitary Standards, Inc. (3-A SSI) is a non-profit association representing equipment manufacturers, processors, regulatory sanitarians and other public health professionals. Through many decades of cooperation, these groups have established a comprehensive inventory of 3-A Sanitary...
ASSE® Certifications
ASSE, the American Society of Sanitary Engineering, is a nonprofit organization that develops and publishes standards aimed at preventing unsanitary design in plumbing systems. Headquartered in Westlake, United States, ASSE standards contribute heavily to the IAPMO Uniform Plumbing Code, the...
NSF Certifications
NSF International is accredited by the Occupational Safety and Health Administration, the Standards Council of Canada (SCC), the American National Standards Institute (ANSI), and the International Accreditation Service. NSF laboratories worldwide are ISO/IEC 17025...
Safety Guidelines
All hose assemblies should be viewed as potential hazards. The proper selection and maintenance of hose, couplings, attachment devices, and accessories is imperative.
Questions? Call 800.355.1991 or email engineering@dixonvalve.com.
General Safety Information
Pressure Ratings...
Crimp and Swage Tool Disclaimer
Ferrule and die/crimp recommendations on this site are only a guide and may not apply to every coupling application. In some instances, alternative dies or crimp diameters must be employed.
The recommendations on this site are to be used with Dixon couplings only. Failure to use Dixon...
Temperature De-rating Chart
When using the STAMPED acronym when specifying or building a hose, the effect of temperature on the rated hose assembly can often be confusing to calculate. The purpose of this chart is to show the effect that increasing the temperature on an assembly has on the overall assembly’s rating. Most...
Trade Shows
February
2/4-2/6: Unified Symposium, Sacramento, CA, Booth P2220
2/18-2/20: Western Petroleum Marketers Association (WPMA), Las Vegas, NV, Booth 203
2/27-2/28: Petroleum & Convenience Expo (PACEshow), Kansas City, MO, Booth 461
November
11...
Why Use Dixon 1-Piece Flange Adapters?
Case Study
End-User Feedback
A common challenge in maintaining equipment used in hydraulic fracturing operations is eliminating and preventing leaks of hazardous and non-hazardous fluids.
Equipment such as blenders, hydration units, and missiles contain several flange adapters, each having welds...
Why Use a Dixon 2-Piece Repair Nut Over a 1-Piece Nut?
Case Study
Facts
The 2-piece nut costs 70% more than a 1-piece standard nut.
The 2-piece nut takes 1/4 of the time to install versus 1-piece nut.
Labor costs $90 to replace the 1-piece nut, based on 1 hour at $90/hour
Use a cutting torch to remove the male hammer union connection, replace the...
Why Use a Dixon Ball-Joint Armored Hose for Water Supply & Return Lines on Electric Furnaces?
Case Study
End-User Feedback
A mill’s acquisition price is only a portion of the total cost to remove and replace large-bore furnace hoses, and here are the related costs.
The time required to move these large assemblies from storeroom to melt shop
Stage the necessary lifting equipment
Schedule...