Case Study
Pump Cavitation Got You Down? One-Piece Suction Manifolds
End-User Feedback
- Sand dropout causes flow restrictions, and pump cavitation is common.
- Traditional welded pipe manifol
CA | en
Case Studies
Case Study
Why Use a Dixon 2-Piece Repair Nut Over a 1-Piece Nut?
Facts
- The 2-piece nut costs 70% more than a 1-piece standard nut.
- The 2-piece nut takes 1/4 of the time to install versus 1-piece nut.
- Labor costs $90 to replace
Case Study
Why Use a Dixon Ball-Joint Armored Hose for Water Supply & Return Lines on Electric Furnaces?
End-User Feedback
A mill’s acquisition price is only a portion of the total cost to remove and replace large-bore furnace hoses, and here are the related costs.
Image
Case Study
Why Use Dixon 1-Piece Flange Adapters?
End-User Feedback
- A common challenge in maintaining equipment used in hydraulic fracturing operations is eliminating and preventi
Image
Case Study
Why Use Dixon Triplex and Quintuplex Manifolds on HHP Hydraulic Fracturing Pumps?
End-User Feedback
- Well service company maintenance personnel state that carbon steel manifolds are working okay.
Image
Case Study
Why Use Dixon Vent-Lock Safety Cam & Groove?
End-User Feedback
- Both safety and maintenance personnel at well service companies have requested cam & groove fittings that relieve remaining low pressure when lever arms are ope