Designed for use with liquids, consult Dixon for specific recommendations

Other gasket types are available, contact Dixon.

• Nitrile Rubber gasket
• Produced as a welded fabrication

• To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
• Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

In reducing couplings, the coupler is the first size in the part number.

• Under no circumstances should cam and groove couplings be used for compressed air or steam service!
• The 8" coupler only interchanges with Dixon Andrews type adapters
• Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.

No standard exists for the 8" fittings, and generally does not interchange with other manufacturers.