Dual-Lock P-Series Thor Interchange Female Thread Coupler

Attributes

Maximum Operating Pressure	300 PSI (20 bar)
Weight	0.61 lb
Break Quantity	1
Optional Package/Box Quantity	1
Material	Steel
Wrench Flat	1-1/4"
Maximum OD	1.55" (39.4 mm)
Thread	NPTF
Body Size	1/2"
Temperature Range	-40°F to 250°F (-40°C to 121°C)
Burst Pressure	2600 PSI (180 bar)
Thread Size	1/2"
Length	2.75" (69.9 mm)

Details

Compatibility & Interchange Data

Thor Finger-Lock Interchange
Interchanges with National A type, Campbell Double-Lock and Thor PHC series couplings

Construction

Machined components are manufactured using solid bar stock.
Nitrile (Nitrile Rubber) seals standard
Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2-Piece Sleeve has a phosphor bronze spring.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Zinc Cast sleeve

Safety Notes

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Resources