Crowdstrike Outage

Due to the global Crowdstrike outage, our operations are currently limited. We are working toward an alternate solution.

Image
F-Series Pneumatic Manual Male Threaded Coupler
Image
f series manual male thread coupler 2fm3-b-half

2FM1-B - F-Series Pneumatic Manual Male Threaded Coupler

2FM1-B
Dixon Distributor? 

Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.

Attributes

Weight
0.19 lb
Break Quantity
0
Optional Package/Box Quantity
0
Material
Brass
Maximum OD
0.88" (22.4 mm)
Thread
NPTF
Body Size
1/4"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
1/8"
Length
1.97" (50.0 mm)
Hex
3/4"
Pressure Rating
See Product Details

Details

Compatibility & Interchange Data

  • Foster 3, 4, 5 and 6 Series
  • Parker 20-Series Manual Interchange
  • Hansen 1000, 400 and 500

Construction

  • Machined components are manufactured using solid bar stock.
  • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Nitrile Rubber) seals are standard
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel sleeve and steel tubular valve

How It Works

  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Safety Notes

It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Specifications

  • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 8,500 PSI (586 bar) Burst
  • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 9,000 PSI (620 bar) Burst

Resources

    Request a Quote

    Need help selecting the correct components?