Catalog Page
Manufactured from CA 360, CA 345 or CA377 brass
CA | es
Imagen
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Atributos
| Peso |
0,08 lb
|
|---|---|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Material |
Latón
|
| Rosca |
Recto
|
| Medida de Tubo |
1/4"
|
| Presión de Trabajo |
1400 PSI
|
| Rango de Temperatura |
-65°F to 250°F (-54°C to 121°C)
|
| Medida de Rosca |
7/16"-20
|
| Medida de Tubería |
1/4"
|
Detalles
Construction
Features
- Economical fitting resists mechanical pullout
- Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
Installation
- Cut tubing squarely and clean tube end thoroughly to remove burrs.
- Place nut onto tube. Place threaded end of nut toward end of tube.
- Flare tube end with flaring tool to provide 45° flare.
- Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for metal-to-metal seal.
Note
Flare tools are available, please contact Dixon for pricing and availability.
Safety Notes
- The PSI rating given is based on a temperature of 73°F (23°C) using copper tubing.
- Temperature and type of tubing used are important factors in working pressure ranges.
Specifications
- Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards).
- Reference SAE 010203
Use
- Manufactured especially for hard-to-hold liquids and gases
- Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared
