Product Information
CA | es
Imagen
Imagen
Imagen
Imagen
PND-DQCKIT2 - 1/4" Industrial DF-Series Automatic Quick Coupler Set - Retail Packaged
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Atributos
| Peso |
0,5916 lb
|
|---|---|
| Break Quantity |
6
|
| Mandatory Package/Box Quantity |
6
|
| Material |
Acople - Latón
Tapón - Acero
|
| DE Máximo |
|
| Rosca |
NPTF
|
| Tamaño de Cuerpo |
|
| Rango de Temperatura |
6" grooved manifold with six 2" female NT ports, one 1" NPT port (left or right version)°F (Not pressure retaining, open flow only°C)
|
| Medida de Rosca |
|
| Longitud |
|
| Hex |
Acople y tapón hembra - 11/16"
|
| Valor de Presión |
Detalles
Compatibilidad e Intercambio de Datos
- Foster 3, 4, 5 and 6 Series
- Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange
- Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500
Construcción
- Machined components are manufactured using solid bar stock.
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
- Nitrile (Nitrile Rubber) seals are standard
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Steel tubular valve
Descripción
(Se requieren 6 cajas por caja)
Como funciona
- To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
- Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
- After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
- After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Incluye
2DF2-B, D2F2, D2M2 (3)
Notas de Seguridad
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
Especificaciones
- Cople - Presión nominal para el acople de latón y el tapón de latón conectados: 300 PSI (20 bar) de máximo trabajo y 16 000 PSI (1100 bar) de reventón
- Cople - Presión nominal para el acople de latón y el tapón de latón conectados: 500 PSI (35 bar) de máximo trabajo y 16000 PSI (1100 bar) de reventón
- Niple hembra: presión nominal cuando se conecta con acoples manuales de latón serie-F: 500 PSI (35 bar) de trabajo máximo y 9000 PSI (620 bar) de reventón
- Male Plug - Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 11,500 PSI (790 bar) Burst
- Enchufe Hembra/Macho - Valor de presión conectado a un Cople Automático Serie D de latón: 500 PSI (35 Bar) Máxima presión de trabajo y Reventón 16,000 PSI (1,100 bar)
- Enchufe Hembra/Macho - Valor de presión conectado a un Cople Automático Serie F de acero: 500 PSI (35 Bar) Máxima presión de trabajo y Reventón 6500 PSI (448 bar)
Recursos
Catalog Page
Imagen
Learning Video
