877-963-4966

Female 37° JIC Swivel x Push-on Hose Barb

Female 37° JIC Swivel x Push-on Hose Barb

×
Part Number 288-1217SS
Material 303 Stainless Steel
Component Material Yellow Plastic Cap
Female Thread UN
Female Thread Size 1-1/16"-12
Tube OD 3/4"
Hose ID 3/4"
Hex 1-1/4"
Length 2.53"
Optional Pkg/Box Qty 10
Weight Lb 0.2590

Specifications

  • Number of Barbs: 3
  • Barb Length: 1.50"

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

  • No hose clamps or ferrules are needed

Safety notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

×

Catalog Page

Interactive Resources

×

Related Products

×
×
×
×
×

Stock Availability