877-963-4966

1/4" Industrial DQC DF Series Quick Coupler Set- Retail Packaged

1/4" Industrial DQC DF Series Quick Coupler Set- Retail Packaged

  • pneumatic fittings display industrial dqc df series quick coupler set
  • pneumatic fittings display industrial dqc df series quick coupler set
×
Part Number PND-DQCKIT1
Description (Case Qty 6 Required)
Includes 2FF2-B, D2F2, D2M2 (3)
Material Brass,
Steel
Thread NPTF
Thread Size 1/4"
Maximum OD Coupler- 0.93",
Female Plug- 0.79",
Male Plug- 0.65" (Coupler- 23.5mm,
Female Plug- 20.1mm,
Male Plug- 16.5mm)
Body Size 1/4"
Hex Coupler- 3/4",
Female Plug- 11/16",
Male Plug- 9/16"
Length Coupler- 2.07",
Female Plug- 1.66",
Male Plug- 1.69" (Coupler- 52.6mm,
Female Plug- 42.2mm,
Male Plug- 42.9mm)
Temperature Range -40°F to +250°F (-40°C to +121°C)
Optional Pkg/Box Qty 6
Weight Lb 0.6000

Specifications

  • Coupler- Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 8,500 PSI (586 bar) Burst
  • Coupler- Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 9,000 PSI (620 bar) Burst
  • Coupler- Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 9,000 PSI (620 bar) Burst
  • Coupler and Male Plug- Rated pressure when connected with Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 6,500 PSI (448 bar) Burst
  • Male Plug- Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 11,500 PSI (790 bar) Burst
  • Female/Male Plug- Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst

Construction

  • Machined components are manufactured using solid bar stock.
  • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Buna-N) seals are standard
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel sleeve and steel tubular valve

Compatibility & Interchange Data

  • Foster 3, 4, 5 and 6 Series
  • Parker 30- Series Automatic Interchange & Parker 20-Series Manual Interchange
  • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500

How it works

  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly.
  • Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.

Safety notes

  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

×
×

Related Products

×
×
×
×
×

Stock Availability