CA | en
Coupling Procedures
Repair
3100: Cam Arm Replacement- 2" & 3" Boss-Lock Cam & Groove Couplers
Inspection
3000: Criteria for a Sufficient Fit of a Boss® Clamp
3001: Bolt Clamp Inspection
3002: Band Clamp Inspection
3003: Used Boss-Lock and Andrews Cam & Groove
3004: Inspection and Maintenance of Food Grade Internal Expansion Plugs
3005: General Assembly Inspection
Installation
2000: Boss® 2 Bolt Clamps
2001: Boss® 4 Bolt Clamps
2002: Boss® 6 Bolt Clamps
2003: 750 and 850 Boss® Clamps with 755 and 850A Piggyback Clamps
2004: B49 "Boss" 6 Bolt Clamp Using B49-2 "Piggyback" Clamp
2100: Pre-Formed Band Clamp Using Pneumatic Roll-Over Tool
2101: Pre-Formed Band Clamp Using Punch Style Tool
2102: Pre-Formed Band Clamps Using Punch Style Tool and Air King® Hose Shank Couplings
2103: Pre-Formed Band Clamps Using Screw-Action Tool with Roll-Over Tool Attachment
2104: Clamp-It Band & Buckle Installation Using Screw Action Tool
2200: Strap Grip Clamps
2201: Double Bolt Clamps (with saddles)
2203: Pinch-On Clamps
2500: Steam Crimp –3/4 in Continental Contitech FlexSteel 250 Hose
2501: Steam Crimp - 1 inch Texcel Tex-Steam Hose
2502: Steam Crimp – 1.5 inch Continental Contitech FlexSteel 250 Steam Hose
2503: Steam Crimp – 1 inch Continental Contitech Flexsteel Hose
2504: Steam Crimp – .75 inch Gates 205MB Steam King Hose
2505: Steam Crimp – .75 inch Texcel Tex-Steam Hose
2506: Steam Crimp – 1.5 inch Gates 205MB Steam King Hose
2509: Steam Crimp- .50" Texcel Tex-Steam Hose
Procedure 2508: Steam Crimp - 1" Gates Plant Master® Steam 250 Hose (Smooth Cover) Formerly 205MB Steam King®
Procedure 2510: Steam Crimp – ¾” Texcel® Tex-Steam Hose (Red)
Miscellaneous
2300: King Cable Safety Cable
2301: Dixon Menders
2303: MIL H 29210C Steam Hose Assembly
2304: Brass Stems and Ferrules Using 5111A & 1765A Tools
2305: Brass Reusable Fittings
2306: Crimping Unirange, Air King®, Dix-Lock®, and Dual-Lock Couplings
2307: Air King® Crimp with Light Duty Ferrules
2308: Connecting Vent-Lock® Safety Cam and Groove Couplings
2400: King Crimp® with Sleeves
2401: King Crimp® with Ferrules
2402: Cam and Groove Coupling to Adapter
Preparation
1100: General Preparation Instructions
1101: How to Use a Dixon Diameter Tape
1102: Clamp-It Band and Buckle Preparation
1103: Set-Up 5111A/1765A Crimping Machine
Selection
1000: Boss® Clamp Selection
1001: Pre-Formed Band Clamp Selection
1002: Brass Reusable Fitting Selection
1003: King Safety Selection
Testing
4000: General Hydrostatic Testing Information
4001: Hydrostatic Test Procedure
4002: Test Pressures & Procedures for Boss-Lock and Andrews Cam & Groove Couplings (Eng/Fr)
4100: General Electrical Continuity Testing Information